Page Comparison

...

...

Mobile Device connectivity

1. From a browser on the device, type in enter the following URL and to make sure NLINK Server can be reached:
   

   Code Block
   http://[NLINKHOST]:9812/adc5.html

   where [NLINKHOST] is the name or IP Address of the machine where NLINK is installed and running.

Anchor
DownloadMobileConfig DownloadMobileConfig

Setting up application

First The first step after installing NLINK Mobile is to setup device to communicate communication with the NLINK Server.

1. Start the NLINK Mobile application by selecting application "NLINK Mobile"
    
2. In the window that is displayed
   
   1. For NLINK Host enter [NLINKHOST] which is the machine name or IP Address of the machine where NLINK is installed and running along with port configured for ADC5. Default The default port is 9812.
   2. For Password enter the NLINK Mobile administrator password as configured in your meta-database. Default The default value is “password” (all lower case).
      
3. Press the OK button.
4. Once the setup is successful you will see the following window to logon. Enter the credentials you use to logon to the NLINK ADC to SAP Solution. Depending on your authentication usedsettings, it can could be Windows domain or SAP logon.
   
5. Once proper credentials are entered and authenticated, depending configuration, you should see your configured ADC menu screen will be displayed.
   
6. Where applicable, the menu options are available under "Action Bar"→ "Action Overflow" in the top right corner.
    

Known Issue

1. If the devices loses connection to network in the middle of posting, in some cases  sometimes multiple messages are displayed. All the messages indicate lack of network connection.
   
   
   
    

Related articles

...