Page Comparison

...

Anchor
DownloadMobileConfig DownloadMobileConfig

Setting up application

After NLINK Mobile Once application is installed on device, first step is to register device and download configuration.

1. Make sure device is connected to wireless network
2. Start NLINK Mobile application by selecting application "NLINK Mobile"
   Image Removed 
3. In the window that is displayed
   
   1. For NLINK Host enter [NLINKHOST] which is machine name or IP Address of the machine where NLINK is installed and running along with port configured for ADC5. Default port is 9812.
   2. For Password enter the NLINK Mobile administrator password as configured in your meta-database. Default value is “password” (all lower case)
      Image Removed
4. Press the OK button
5. Once the setup is successful you will see following window to logon. Enter the credentials you use to logon to NLINK (depending on authentication used, it can be Windows domain or SAP logon)
   Image Removed
6. Once proper credentials are entered and authenticated, depending configuration, ADC menu screen will be displayed
   Image Removed

Known Issue

If the devices loses connection to network in middle posting,in some cases  multiple messages are displayed. All indicate lack of network connection

Image Removed

Image Removed

Image Removed

, see here to complete the setup.

Related articles

...