Page Comparison

Follow these steps to install the NLINK Mobile Application used to access ADC screens on connected device.without using Enterprise Mobility Management tools. 

Step-by-step guide

Mobile Device Prerequisites

1. Running The device must be running Android 4.4 (Kitkat) or later.
2. Is The device must be connected to a wireless network and can reach .
3. The device must be able to reach the NLINK Server machine via port 9812.

Anchor
DownloadMobileApp DownloadMobileApp

Download NLINK Mobile Application 

1. From a browser on the device, type in enter the following URL
   

   Code Block
   http://[NLINKHOST]:9812/adcadc5.html

   where [NLINKHOST] is the name, or IP Address, of the machine where NLINK is installed and running.

2. A page with NLINK Mobile download instuctions instructions will be rendered

...

After NLINK Mobile is installed on device, first step is to register device and download configuration.

1. Make sure device is connected to wireless network
2. Start NLINK Mobile application by selecting application "NLINK Mobile"
3. In the window that is displayed
   1. For Host enter [NLINKHOST] as above (name or IP Address of the machine where NLINK is installed and running)
   2. For Password enter the NLINK Mobile administrator password as configured in your meta-database. Default value is “password” (all lower case)
4. Press the Register button to download configuration data.

.

...

1. .
   
   Image Added
2. Click on the link to download the application. When the download has finished, click the resultant download to launch the application install. (Presentation may vary depending on the browser.)
   1. If the application download screen disappears, the downloads can be found in the Downloads application. Look for the NLINK Application.apk download.
      Image Added 
3. Install the application.
   1. When trying to install the application a warning may appear offering to block the installation. This is because the app was not downloaded from a known secure place, (e.g. Google Play).
      Image Added
      To get around the issue, you will have to change the Security settings on the device.
      1. Either click the Settings button in the warning message, or open application Settings and go to the Security option. 
         Image Added
      2. In the Security settings, check the box called Unknown sources. When you select this option. you will get a warning. Click OK on the warning message.
         Image AddedImage Added
   2. Once the install starts, another message appears describing the access required by the NLINK Mobile application: access to the disk/SD card, access to the wireless network, and also Bluetooth (which will be used only if the device needs to connect to an external scanner).
      Click Install to proceed.
      . Image Added

Anchor
DownloadMobileConfig DownloadMobileConfig

Setting up the application

Once the application is installed, see here to complete the setup.

Related articles

...