Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Follow these steps to install the NLINK Mobile Application used to access ADC screens on connected device.


Prerequisites

  • NLINK ADC to SAP Solution is installed and running
  • Proper licensing in place to install NLINK Mobile application on mobile device
  • NLINK Server is running

Step-by-step guide

Mobile Device Prerequisites

  1. Running Android 4.4 (Kitkat) or later.
  2. Is connected to wireless network and can reach NLINK Server machine via port 9812

Download NLINK Mobile Application 

  1. From browser on device, type in following URL

    http://[NLINKHOST]:9812/adc.html

    where [NLINKHOST] is name or IP Address of machine where NLINK is installed and running.

  2. A page with NLINK Mobile download instuctions will be rendered

Download Configuration

After NLINK Mobile is installed on device, first step is to register device and download configuration.

  1. Make sure device is connected to wireless network
  2. Start NLINK Mobile application by selecting application "NLINK Mobile"
  3. In the window that is displayed
    1. For Host enter [NLINKHOST] as above (name or IP Address of the machine where NLINK is installed and running)
    2. For Password enter the NLINK Mobile administrator password as configured in your meta-database. Default value is “password” (all lower case)
  4. Press the Register button to download configuration data.

.

  

  • No labels