Setting up NLINK Mobile Application on Android

Follow these steps to install the NLINK Mobile Application without using Mobile Device Management tools.

Prerequisites

NLINK Mobile is installed on an Android device and Android device can connect to wireless network
NLINK Server is running and is accessible to Android device.
Firewall on NLINK Host is setup to allow incoming requests for ADC Port (default port is 9812)

Step-by-step guide

From browser on device, type in following URL and make sure NLINK Server can be reached
```
http://[NLINKHOST]:9812/adc5.html
```
where [NLINKHOST] is name or IP Address of machine where NLINK is installed and running.

First step after installing NLINK Mobile is to setup device to communicate with NLINK Server

Start NLINK Mobile application by selecting application "NLINK Mobile"
In the window that is displayed
1. For NLINK Host enter [NLINKHOST] which is machine name or IP Address of the machine where NLINK is installed and running along with port configured for ADC5. Default port is 9812.
2. For Password enter the NLINK Mobile administrator password as configured in your meta-database. Default value is “password” (all lower case)
Press the OK button
Once the setup is successful you will see following window to logon. Enter the credentials you use to logon to NLINK ADC to SAP Solution. Depending on authentication used, it can be Windows domain or SAP logon.
Once proper credentials are entered and authenticated, depending configuration, ADC menu screen will be displayed
Where applicable, the menu options are available under "Action Bar"→ "Action Overflow"

If the devices loses connection to network in middle posting,in some cases multiple messages are displayed. All indicate lack of network connection