Versions Compared

Old Version 13

changes.mady.by.user Darcy Curtin

Saved on

compared with

New Version 14

changes.mady.by.user Junot Systems

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note
titlePrerequisites
  • NLINK ADC to SAP Solution with Android App is installed and running.
  • NLINK Server is running.
  • Firewall on NLINK Host is setup to allow incoming requests for the ADC Port, (default port is 9812).

Step-by-step guide

Mobile Device Prerequisites

  1. Running The device must be running Android 4.4 (Kitkat) or later.
  2. Connected The device must be connected to a wireless networkCan .
  3. The device must be able to reach the NLINK Server machine via port 9812.

Anchor
DownloadMobileApp
DownloadMobileApp
Download NLINK Mobile Application 

  1. From a browser on the device, enter the following URL

    Code Block
    http://[NLINKHOST]:9812/adc5.html

    where [NLINKHOST] is the name, or IP Address, of the machine where NLINK is installed and running.

  2. A page with NLINK Mobile download instructions will be rendered.

  3. Click on the link to download the application. When the download has finished, click the resultant download to launch the application install. (Presentation may vary depending on the browser.)
    1. If the application download screen disappears, the downloads can be found in the Downloads application. Look for the NLINK Application.apk download.
       
  4. Install the application.
    1. When trying to install the application a warning may appear offering to block the installation. This is because the app was not downloaded from a known secure place, (e.g. Google Play).

      To get around the issue, you will have to change the Security settings on the device.
      1. Either click the Settings button in the warning message, or open application Settings and go to the Security option. 
      2. In the Security settings, check the box called Unknown sources. When you select this option. you will get a warning. Click OK on the warning message.
    2. Once the install starts, another message appears describing the access required by the NLINK Mobile application: access to the disk/SD card, access to the wireless network, and also bluetooth Bluetooth (which will be used only if the device needs to connect to an external scanner).
      Click Install to proceed.
      . 

Anchor
DownloadMobileConfig
DownloadMobileConfig
Setting up the application

Once the application is installed, see here to complete the setup.

...