Install NLINK Mobile Application on Android using a website

Follow these steps to install the NLINK Mobile Application without using Enterprise Mobility Management tools.

Prerequisites

NLINK ADC to SAP Solution with Android App is installed and running
NLINK Server is running
Firewall on NLINK Host is setup to allow incoming requests for ADC Port (default port is 9812)

Step-by-step guide

From a browser on the device, enter the following URL
```
http://[NLINKHOST]:9812/adc5.html
```
where [NLINKHOST] is name or IP Address of machine where NLINK is installed and running.
A page with NLINK Mobile download instructions will be rendered.
Click on the link to download the application. When the download has finished, click the resultant download to launch application install. (Presentation may vary depending on browser.)
1. If the application download screen disappears the downloads can be found in the Downloads application. Look for the NLINK Application.apk download.
Install the application.
1. When trying to install the application a warning may appear offering to block the installation. This is because app was not downloaded from known secure place (e.g. Google Play).
  
  To get around the issue, you will have to change the Security settings on the device.
  1. Either click the Settings button in the warning message, or open application Settings and go to the Security option.
  2. In the Security settings, check the box called Unknown sources. When you select this option. you will get a warning. Click OK on the warning message.
2. Once the install starts, another message appears describing the access required by the NLINK Mobile application: access to the disk/SD card, access to the wireless network, and also bluetooth (which will be used only if the device needs to connect to an external scanner).
  Click Install to proceed.
  .

Once the application is installed, see here to complete the setup.