Page Comparison

Follow these steps to install the NLINK Mobile Application without using Mobile Device Enterprise Mobility Management tools.

Note

title	Prerequisites

NLINK ADC to SAP Solution with Android App is installed and running
NLINK Server is running
Firewall on NLINK Host is setup to allow incoming requests for ADC Port (default port is 9812)

...

Running Android 4.4 (Kitkat) or later.
Is connected Connected to wireless network and can
Can reach the NLINK Server machine via port 9812

Anchor
DownloadMobileApp
DownloadMobileApp
Download NLINK Mobile Application

From a browser on the device, type in enter the following URL
Code Block
http://[NLINKHOST]:9812/adc5.html
where [NLINKHOST] is name or IP Address of machine where NLINK is installed and running.
A page with NLINK Mobile download instructions will be rendered.
Click on the link to download the application, once the download finish click . When the download has finished, click the resultant download to launch application install. (Presentation may vary depending on browser.)
1. If the application download screen disappears the downloads can be found using "in the Downloads" application and find " application. Look for the NLINK Application.apk" download.
Install the application.
1. When trying to install the application a warning will appear about blocked install., it may appear offering to block the installation. This is because app was not downloaded from known secure place (e.g. Google Play).
  
  To get around the issue, you will have to change the Security settings on the device.
  1. Either click "the Settings" in previous screen button in the warning message, or open application "Settings" and goto "go to the Security" option.
  2. In "the Security "settings, check the box called "Unknown sources". Once When you select the this option. you will get a warning, press ". Click OK " on the warning message.
2. Once the install starts, another message appears indicating describing the access required by the NLINK Mobile application. Press "Install" to proceed.
  NLINK Mobile application requires access to disk and wireless network : access to the disk/SD card, access to the wireless network, and also bluetooth (which will be used only if the device needs to use connect to an external scanner).
  Click Install to proceed.
  .